New Products.
pre order! ETA mid Nov!
Ever wondered why the Japanese drivers don’t blow up stock SR gearboxes? They haven’t deleted their OEM clutch delay valves! We’ve developed our own replacements with three tuning options, and we guarantee it’s cheaper than a new gearbox.
It might look small, but this little guy can save your axles, gearboxes and clutches. The CST Braided Clutch Line with integrated clutch delay valve is basically the driver mod you’re lacking — by letting the clutch slip just enough during hard kicks or fast shifts, it smooths out the shock that usually gets sent straight into your driveline. The result? Less broken shit.
The best part: pedal feel stays the same, shifts are still snappy, you only notice it when you go full beast mode on that clutch dump. It won’t mess with your driving—just saves your gearbox from going KABOOM!
Includes
2 piece braided clutch line to fit all S-Chassis.
Clutch delay valve
3x slip adjustment inserts (Drift- 0.04, Track - 0.028, Street - 0.021)
We broke third gear more times than we can count. We snapped 5 speed mainshafts. We broke axles. Then we installed a Clutch delay valve. No more breakages. We’re running one in every single build from now on.
Complete cluster replacement for the Nissan S13/180sx/240sx, to suit Haltech IC7 Digital Dash’s!
update! You all cried, so now there’s a Powertune V5 option available!
Designed in house, with fun little features not found on other digital dash mounts out there - we’re stoked to release our own version of what’s become the most common dash upgrade for Nissan S13’s. Hand made, perfect fit, and priced to make drifting more fun - we’re sure you’re going to love these!
Included in each kit is a jumper wire (and easy to follow instructions) to keep your alternator charging. Without it, as soon as you unplug your OEM dash, the SR20 alternator system won’t start charging.
Features
USB-B Panel Mount Jack optional
Alternator Charge Light Jumper Included.
Polaroid Holder Slot
DIY Finishing option available for cheaper!
Tanoshi Stars embossed on lower bezel.
Made with Carbon Fiber infused ePA for high temp resistance.
No cutting of your original dash required
Direct fit for 180sx, S13, 240sx
To Fit
1989 - 1998 Nissan 180sx
1989 - 1993 Nissan Silvia (S13, 240sx)
Notes
DIY Option gives you the raw 3d printed dash. You’ll need to sand it, spray it with filler primer and then spray it again with your choice of paint colour. Failing to coat the dash makes them far more susceptible to deformation in the heat.
Heat resistant, but please remember these are 3d printed using ePA-CF. While that’s technically rated to 155ºC, the Australian sun does some crazzzzzy things inside cars in Summer. We’ve tested these dashes throughout summer in QLD with no problems, but your car might be hotter than ours 🥵
No, we don’t make these for UC10’s (They don’t fit very well)
Every sticker you need for your car to pass scrutineering at the local track!
Made by our favorite sticker & livery supplier - Touge Runners here in Sydney, this sticker pack contains the regulation stickers required by motorsport regulators in Australia - (Motorsport Australia / CAMS / AASA and RACERS). Laminated for UV resistance and printed on high quality vinyl, they’re easy to apply and won’t fade for many years in the sun.
Battery (Blue Triangle)
Kill Switch
Fire Extinguisher
Tow points
Net Release
Plus heaps of handy stickers to label switches, lights and relays!
Don’t get caught out at the track, grab one of these and get your car up to spec.
We’re all about building cars which Leave a lasting impression on those who experience them.
Jump in. Lets go for a ride!
Our BMW E82 Drift Car…
Follow our journey.
