IC7 Digital Dash Mount - S13/180sx
Complete cluster replacement for the Nissan S13/180sx/240sx, to suit Haltech IC7 Digital Dash’s!
Designed in house, with fun little features not found on other digital dash mounts out there - we’re stoked to release our own version of what’s become the most common dash upgrade for Nissan S13’s. Hand made, perfect fit, and priced to make drifting more fun - we’re sure you’re going to love these!
Included in each kit is a jumper wire (and easy to follow instructions) to keep your alternator charging. Without it, as soon as you unplug your OEM dash, the SR20 alternator system won’t start charging.
Features
USB-B Panel Mount Jack optional
Alternator Charge Light Jumper Included.
Polaroid Holder Slot
DIY Finishing option available for cheaper!
Tanoshi Stars embossed on lower bezel.
Made with Carbon Fiber infused ePA for high temp resistance.
No cutting of your original dash required
Direct fit for 180sx, S13, 240sx
To Fit
1989 - 1998 Nissan 180sx
1989 - 1993 Nissan Silvia (S13, 240sx)
Notes
DIY Option gives you the raw 3d printed dash. You’ll need to sand it, spray it with filler primer and then spray it again with your choice of paint colour. Failing to coat the dash makes them far more susceptible to deformation in the heat.
Heat resistant, but please remember these are 3d printed using ePA-CF. While that’s technically rated to 155ºC, the Australian sun does some crazzzzzy things inside cars in Summer. We’ve tested these dashes throughout summer in QLD with no problems, but your car might be hotter than ours 🥵
No, we don’t make these for UC10’s (They don’t fit very well)
No, we don’t make these for Powertune (Powertune’s are awful)
Complete cluster replacement for the Nissan S13/180sx/240sx, to suit Haltech IC7 Digital Dash’s!
Designed in house, with fun little features not found on other digital dash mounts out there - we’re stoked to release our own version of what’s become the most common dash upgrade for Nissan S13’s. Hand made, perfect fit, and priced to make drifting more fun - we’re sure you’re going to love these!
Included in each kit is a jumper wire (and easy to follow instructions) to keep your alternator charging. Without it, as soon as you unplug your OEM dash, the SR20 alternator system won’t start charging.
Features
USB-B Panel Mount Jack optional
Alternator Charge Light Jumper Included.
Polaroid Holder Slot
DIY Finishing option available for cheaper!
Tanoshi Stars embossed on lower bezel.
Made with Carbon Fiber infused ePA for high temp resistance.
No cutting of your original dash required
Direct fit for 180sx, S13, 240sx
To Fit
1989 - 1998 Nissan 180sx
1989 - 1993 Nissan Silvia (S13, 240sx)
Notes
DIY Option gives you the raw 3d printed dash. You’ll need to sand it, spray it with filler primer and then spray it again with your choice of paint colour. Failing to coat the dash makes them far more susceptible to deformation in the heat.
Heat resistant, but please remember these are 3d printed using ePA-CF. While that’s technically rated to 155ºC, the Australian sun does some crazzzzzy things inside cars in Summer. We’ve tested these dashes throughout summer in QLD with no problems, but your car might be hotter than ours 🥵
No, we don’t make these for UC10’s (They don’t fit very well)
No, we don’t make these for Powertune (Powertune’s are awful)
Complete cluster replacement for the Nissan S13/180sx/240sx, to suit Haltech IC7 Digital Dash’s!
Designed in house, with fun little features not found on other digital dash mounts out there - we’re stoked to release our own version of what’s become the most common dash upgrade for Nissan S13’s. Hand made, perfect fit, and priced to make drifting more fun - we’re sure you’re going to love these!
Included in each kit is a jumper wire (and easy to follow instructions) to keep your alternator charging. Without it, as soon as you unplug your OEM dash, the SR20 alternator system won’t start charging.
Features
USB-B Panel Mount Jack optional
Alternator Charge Light Jumper Included.
Polaroid Holder Slot
DIY Finishing option available for cheaper!
Tanoshi Stars embossed on lower bezel.
Made with Carbon Fiber infused ePA for high temp resistance.
No cutting of your original dash required
Direct fit for 180sx, S13, 240sx
To Fit
1989 - 1998 Nissan 180sx
1989 - 1993 Nissan Silvia (S13, 240sx)
Notes
DIY Option gives you the raw 3d printed dash. You’ll need to sand it, spray it with filler primer and then spray it again with your choice of paint colour. Failing to coat the dash makes them far more susceptible to deformation in the heat.
Heat resistant, but please remember these are 3d printed using ePA-CF. While that’s technically rated to 155ºC, the Australian sun does some crazzzzzy things inside cars in Summer. We’ve tested these dashes throughout summer in QLD with no problems, but your car might be hotter than ours 🥵
No, we don’t make these for UC10’s (They don’t fit very well)
No, we don’t make these for Powertune (Powertune’s are awful)